Glazed fire doors in Dover, done to the evidence
Looking for glazed fire doors in Dover? We supply and fit certified fire doors and components across Dover and the wider Kent area, working from a free survey and a fixed written quote.
In and around Dover, fire door work covers everything from care homes to small offices. We plan each job around the people who use the building.
When a vision panel breaks in a Dover building, we re-glaze it to the door's original glazing system rather than a near match. We check glazed doors in Dover for both fire performance and safety glazing before recommending repair or replacement.
New glazed doors or re-glazing?
Where a door already has a certified aperture, it can usually be re-glazed with the specified glass and system after damage. Cutting a new vision panel into an existing fire door is a different matter: it is only acceptable if the door's certification covers that aperture size and position. In most cases a new glazed doorset is the right answer.
Each installation includes:
- Re-glazing of damaged vision panels to the original system
- Glazed doorsets with certified apertures
- Fire-rated glass suited to the rating and location
- Tested beads, glazing seals and fixings
What the rules say for Dover
The rules that apply to fire doors in Dover are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Dover block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Buildings and duty holders in Dover
Landlords, managing agents, facilities teams and homeowners in Dover can all commission glazed fire doors from us. The usual settings are care homes and clinics, though single doors for schools are just as welcome.
From enquiry to handover in Dover
- Identify the door's certification and glazing system
- Confirm glass type, size and impact requirements
- Supply glazed doorsets or matching glazing kits
- Fit glass, seals and beads to the tested system
- Check gaps, closer and latching on the finished door
- Record the products used
Budgeting for glazed fire doors in Dover
As a guide, budget £850–£1,900 per glazed doorset supplied and fitted; re-glazing priced per panel, ex VAT for glazed fire doors. The figure for your Dover building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Around Dover
We also cover towns near Dover, including Folkestone (11.3 km away), Deal and Canterbury. If your building is in CT17 or a neighbouring district, the service and pricing are the same.
Common questions
Do you cover CT17 and nearby postcodes?
Yes. We cover Dover including CT17, and nearby towns such as Folkestone and Deal. The survey and written quote are free.
Can you work from an existing inspection report for my Dover building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can any toughened glass go in a fire door?
No. Fire doors need fire-rated glass of the type and size covered by the door's test evidence, fitted with the matching beads and seals. Standard toughened glass is not fire resisting.
Are wired glass fire doors still acceptable?
Some older doors use wired glass. Whether it is acceptable depends on its fire rating and whether it meets safety glazing rules for that location. We advise case by case.