Glazed fire doors in Kent: what's involved
Whether your building is in Maidstone, Gillingham or a smaller place in Kent, we can provide glazed fire doors with the same evidence-led approach.
When a vision panel breaks in a Kent building, we re-glaze it to the door's original glazing system rather than a near match. Schools, offices and care settings in Kent often need vision panels, and each one has to use fire-rated glass in a tested system.
Kent has a mix of buildings, from purpose-built blocks to converted houses and commercial premises. We tailor the programme to the building, not the other way round.
Why glazing is a common failure point
Vision panels are useful on corridors, classrooms and wards, but they are also where many fire doors go wrong. Ordinary glass gets swapped in after a breakage, beads are fixed with the wrong pins, glazing seals are missing, or an aperture has been cut on site with no evidence behind it. Each of these can undermine the whole door. Our fire door glazing guide covers the details.
Fire door law for Kent properties
The rules that apply to fire doors in Kent are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Kent block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Our process in Kent
- Identify the door's certification and glazing system
- Confirm glass type, size and impact requirements
- Supply glazed doorsets or matching glazing kits
- Fit glass, seals and beads to the tested system
- Check gaps, closer and latching on the finished door
- Record the products used
What does glazed fire doors cost in Kent?
As a guide, budget £850–£1,900 per glazed doorset supplied and fitted; re-glazing priced per panel, ex VAT for glazed fire doors. The figure for your Kent building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Common questions
Do you provide glazed fire doors across Kent?
Yes. We cover all of Kent, including Maidstone and Gillingham. Surveys and written quotes are free.
Can any toughened glass go in a fire door?
No. Fire doors need fire-rated glass of the type and size covered by the door's test evidence, fitted with the matching beads and seals. Standard toughened glass is not fire resisting.
Are wired glass fire doors still acceptable?
Some older doors use wired glass. Whether it is acceptable depends on its fire rating and whether it meets safety glazing rules for that location. We advise case by case.