Fire door supply and fitting in England, Wales, Scotland and Northern Ireland sales@firedoor-installation.comGuide prices
Fire Door Installation

Certified fire doorsets in Seaford

Surveyed, supplied and fitted in Seaford. Leaf, frame and ironmongery tested together and delivered pre-hung, for faster, better-evidenced installs.

Quote in Seaford

Free survey and a fixed written quote.

Prefer to talk? Call 0800 088 6248.

Certified fire doorsets for Seaford buildings

If you need certified fire doorsets in Seaford, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.

Buildings in and around Seaford range from care homes to light industrial buildings and houses with integral garages. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

Every doorset we fit in Seaford is handed over with its certificate reference and photographs of the frame fixing and gap sealing. Doorsets suit refurbishment programmes in Seaford, where several openings can be measured, ordered and fitted in one planned sequence.

How is a doorset installed?

The opening is prepared to the size and tolerances in the manufacturer's instructions. The frame is fixed with the specified fixings at the specified centres, packed where needed, and checked for square, plumb and twist. The gap between frame and wall is then sealed with a material covered by the evidence, which BS 8214:2026 now describes in more detail. Finally the leaf is adjusted, the closer is set and the assembly is tested before the architraves go on.

What you get:

  • Pre-hung, pre-machined doorsets where available
  • Certificate references and photo record per opening
  • Closer set-up and close-and-latch testing
  • Installation to the manufacturer's instructions

Fire door law for Seaford properties

England's framework applies in Seaford. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Seaford, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Buildings and duty holders in Seaford

You are most likely to need certified fire doorsets if you look after schools and offices, refurbishment programmes or blocks of flats. Whatever the building in Seaford, we survey each opening and tell you which doors need work and which do not.

How a Seaford job runs

  1. Survey and measure every structural opening
  2. Specify doorsets by rating, size, hand, finish and hardware
  3. Prepare openings and remove existing doors and linings
  4. Fix and seal the frames to the structure
  5. Hang, adjust and test each leaf and closer
  6. Fit architraves, make good and hand over evidence

Prices for certified fire doorsets in Seaford

If you need a budget figure first, the guide for certified fire doorsets is £650–£1,300 for an FD30 doorset and £850–£1,800 for FD60, supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Around Seaford

Seaford is about 18.2 km from Brighton, and we cover both, along with nearby Rottingdean and Eastbourne. Send us your postcode and we'll confirm survey dates.

Common questions

Is Seaford within your coverage area?

It is. We cover Seaford in East Sussex and neighbouring towns such as Rottingdean. There is no charge for the survey.

Can you work from an existing inspection report for my Seaford building?

Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.

How long do doorsets take to arrive?

Lead times depend on the manufacturer, size, finish and ironmongery. Standard sizes can be quick; bespoke sizes and finishes take longer. We give you the lead time with the quote and confirm it at order.

Are doorsets more expensive than a leaf?

The product costs more, but the labour is often lower and the result is better evidenced. Where a frame would need replacing anyway, a doorset is usually the better value.

Talk to us about Seaford

Tell us about the doors and we will come back with survey dates and a fixed written quote.

CallGet a quote