Intumescent strips and smoke seals in Seaford

Getting intumescent strips and smoke seals right in Seaford

Looking for intumescent strips and smoke seals in Seaford? We supply and fit certified fire doors and components across Seaford and the wider East Sussex area, working from a free survey and a fixed written quote.

Fire doors in Seaford protect escape routes in houses with integral garages, family homes after loft conversions and light industrial buildings alike. We adapt the programme to the building and its occupants, never the standard of the installation.

We check that each door in your Seaford building closes and latches against its new seals before signing it off. Painted and missing seals are among the most common fire door defects nationally; in Seaford we replace them with the type and size the certification specifies.

Pads, linings and hidden protection

Fire doors also rely on intumescent material you cannot see: pads behind hinges, linings around lock bodies and glazing seals. Where these are missing or damaged, we fit the correct items as part of the work.

On a typical job that means:

• Check of gaps and closing after fitting
• Intumescent pads to hinges and locks
• Intumescent strips in frame or leaf edge
• Identification of the specified seals

Rules and responsibilities in Seaford

Fire doors in Seaford fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.

For residential buildings in Seaford above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.

Which buildings in Seaford need intumescent strips and smoke seals?

From schools to HMOs, the requirement for intumescent strips and smoke seals in Seaford comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.

Our process in Seaford

1. Identify door certification and seal specification
2. Remove failed seals and clean the grooves
3. Fit new strips and seals to the specified positions
4. Fit missing pads and lock linings
5. Check the door closes and latches against the new seals
6. Record the products fitted

Guide prices in Seaford

Guide pricing for intumescent strips and smoke seals: £45–£110 per door to supply and fit strips and seals, ex VAT. Volume work across several doors in one Seaford building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Seaford and neighbouring towns

Neighbouring towns such as Rottingdean, Eastbourne, Hailsham and Brighton are covered too, so clients with several buildings can use one installer and one evidence format.

Questions