Certified fire doorsets in Portslade

Certified fire doorsets: our service in Portslade

When you book certified fire doorsets in Portslade, the aim is simple: doors that close, latch and seal as tested, with records that prove it.

Fire doors in Portslade protect escape routes in small offices, light industrial buildings and small blocks of flats alike. We adapt the programme to the building and its occupants, never the standard of the installation.

Doorsets suit refurbishment programmes in Portslade, where several openings can be measured, ordered and fitted in one planned sequence. Pre-hung doorsets keep disruption down in occupied buildings in Portslade, with less cutting and fewer return visits.

Why choose a doorset over a door leaf?

A fire door's rating belongs to the assembly that was tested, not to the leaf on its own. When a certified leaf is hung in an old frame with mismatched hinges and seals, nobody can say with confidence how it will perform. A doorset arrives with the frame, gaps and ironmongery already matched, so the installer's job is to fix it correctly into the opening and seal it to the structure.

Doorsets also cut time on site, which matters in occupied buildings: less cutting, less dust and fewer return visits.

Each installation includes:

• Doorset selection to rating, size and use
• Certificate references and photo record per opening
• Frame fixing and frame-to-wall gap sealing
• Closer set-up and close-and-latch testing

Which fire door rules apply in Portslade?

Fire doors in Portslade fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.

For residential buildings in Portslade above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.

Who needs certified fire doorsets in Portslade?

You are most likely to need certified fire doorsets if you look after schools and offices, blocks of flats or new-build and conversion projects. Whatever the building in Portslade, we survey each opening and tell you which doors need work and which do not.

The steps on a Portslade installation

1. Survey and measure every structural opening
2. Specify doorsets by rating, size, hand, finish and hardware
3. Prepare openings and remove existing doors and linings
4. Fix and seal the frames to the structure
5. Hang, adjust and test each leaf and closer
6. Fit architraves, make good and hand over evidence

What does certified fire doorsets cost in Portslade?

Guide pricing for certified fire doorsets: £650–£1,300 for an FD30 doorset and £850–£1,800 for FD60, supplied and fitted, ex VAT. Volume work across several doors in one Portslade building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Covering Portslade and nearby

We also cover towns near Portslade, including Hove (3.7 km away), Brighton and Worthing. If your building is in BN41 or a neighbouring district, the service and pricing are the same.

Common questions