FD30 fire doors in Seaford

FD30 fire doors in Seaford: what's involved

Our FD30 fire doors service covers Seaford and the wider East Sussex area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.

Buildings in and around Seaford range from small blocks of flats to schools and light industrial buildings. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

In Seaford, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. For a mixed portfolio in Seaford, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side.

Leaf only or a full doorset?

If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.

We tell you which route each opening needs on the survey, door by door, and why.

As standard, the work covers:

• Intumescent strips and smoke seals to the certification
• Frame-to-wall gap sealed with an evidenced material
• Fire-tested hinges, latch or lock and intumescent pads
• Photo record, product data and certificate references at handover

Fire door law for Seaford properties

Fire doors in Seaford fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.

For residential buildings in Seaford above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.

Which buildings in Seaford need FD30 fire doors?

Landlords, managing agents, facilities teams and homeowners in Seaford can all commission FD30 fire doors from us. The usual settings are schools and offices, though single doors for blocks of flats are just as welcome.

What happens after you enquire

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

What does FD30 fire doors cost in Seaford?

Budget around £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. Our guide prices are the same in Seaford as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.

Seaford and neighbouring towns

Nearby towns we cover include Rottingdean, Eastbourne and Hailsham. Distance from Seaford does not change our guide prices, and the survey and quote are free.

Questions