Certified fire doorsets for Devon buildings
Across Devon, from Plymouth to Exeter, we survey, supply and fit certified fire doorsets for homes, blocks of flats and workplaces.
Doorsets suit refurbishment programmes in Devon, where several openings can be measured, ordered and fitted in one planned sequence. Pre-hung doorsets keep disruption down in occupied buildings in Devon, with less cutting and fewer return visits.
Wherever your building is in Devon, the fire safety duties come from national rules, and our installation standard is the same.
How is a doorset installed?
The opening is prepared to the size and tolerances in the manufacturer's instructions. The frame is fixed with the specified fixings at the specified centres, packed where needed, and checked for square, plumb and twist. The gap between frame and wall is then sealed with a material covered by the evidence, which BS 8214:2026 now describes in more detail. Finally the leaf is adjusted, the closer is set and the assembly is tested before the architraves go on.
Fire door law for Devon properties
Fire doors in Devon fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Devon above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
What happens after you enquire
- Survey and measure every structural opening
- Specify doorsets by rating, size, hand, finish and hardware
- Prepare openings and remove existing doors and linings
- Fix and seal the frames to the structure
- Hang, adjust and test each leaf and closer
- Fit architraves, make good and hand over evidence
What does certified fire doorsets cost in Devon?
As a guide, budget £650–£1,300 for an FD30 doorset and £850–£1,800 for FD60, supplied and fitted, ex VAT for certified fire doorsets. The figure for your Devon building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Questions
Do you provide certified fire doorsets across Devon?
Yes. We cover all of Devon, including Plymouth and Exeter. Surveys and written quotes are free.
Can a doorset be fitted into an existing opening?
Usually, yes. Doorsets are made to fit the structural opening once the old frame is removed. We measure the opening on the survey so the doorset is made to the right size and the gaps to the wall stay within what the evidence allows.
Are doorsets more expensive than a leaf?
The product costs more, but the labour is often lower and the result is better evidenced. Where a frame would need replacing anyway, a doorset is usually the better value.