Certified fire doorsets in Exmouth

Getting certified fire doorsets right in Exmouth

If you need certified fire doorsets in Exmouth, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.

Buildings in and around Exmouth range from family homes after loft conversions to small offices and small blocks of flats. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

Every doorset we fit in Exmouth is handed over with its certificate reference and photographs of the frame fixing and gap sealing. Doorsets suit refurbishment programmes in Exmouth, where several openings can be measured, ordered and fitted in one planned sequence.

Why choose a doorset over a door leaf?

A fire door's rating belongs to the assembly that was tested, not to the leaf on its own. When a certified leaf is hung in an old frame with mismatched hinges and seals, nobody can say with confidence how it will perform. A doorset arrives with the frame, gaps and ironmongery already matched, so the installer's job is to fix it correctly into the opening and seal it to the structure.

Doorsets also cut time on site, which matters in occupied buildings: less cutting, less dust and fewer return visits.

Each installation includes:

• Frame fixing and frame-to-wall gap sealing
• Doorset selection to rating, size and use
• Closer set-up and close-and-latch testing
• Certificate references and photo record per opening

Rules and responsibilities in Exmouth

The rules that apply to fire doors in Exmouth are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.

Where a Exmouth block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.

Who needs certified fire doorsets in Exmouth?

The need for certified fire doorsets usually arises in refurbishment programmes or blocks of flats, and sometimes new-build and conversion projects. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Exmouth to keep escape routes protected throughout.

From enquiry to handover in Exmouth

1. Survey and measure every structural opening
2. Specify doorsets by rating, size, hand, finish and hardware
3. Prepare openings and remove existing doors and linings
4. Fix and seal the frames to the structure
5. Hang, adjust and test each leaf and closer
6. Fit architraves, make good and hand over evidence

Prices for certified fire doorsets in Exmouth

Guide pricing for certified fire doorsets: £650–£1,300 for an FD30 doorset and £850–£1,800 for FD60, supplied and fitted, ex VAT. Volume work across several doors in one Exmouth building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Covering Exmouth and nearby

Nearby towns we cover include Heavitree, Exeter and Newton Abbot. Distance from Exmouth does not change our guide prices, and the survey and quote are free.

Common questions