What fire door ironmongery in Ewell should include
When you book fire door ironmongery in Ewell, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Around Ewell, light industrial buildings, houses with integral garages and schools all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Ewell we replace them with hardware covered by each door's evidence. Signage for fire doors in Ewell buildings is fitted as part of the job, not as an afterthought.
Why hardware choice matters
Fire doors are tested with particular hardware. Hinges hold the door in place as it heats up; locks and latches keep it shut against fire pressure; their holes are protected with intumescent linings. Swapping in a cheaper hinge, a larger lock body or a lever on a spindle that melts can change how the door behaves. Hinges for fire doors are commonly grade 13 to BS EN 1935.
What you get:
- Fire door signage
- Fire-rated hinges, commonly grade 13
- Bolts and selectors where specified
- Locks and latches covered by the evidence
Fire door law for Ewell properties
England's framework applies in Ewell. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Ewell, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Who needs fire door ironmongery in Ewell?
You are most likely to need fire door ironmongery if you look after schools, offices or blocks of flats. Whatever the building in Ewell, we survey each opening and tell you which doors need work and which do not.
What happens after you enquire
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
Prices for fire door ironmongery in Ewell
As a guide, budget from £40 for minor items to £350 for a full hardware set per door, ex VAT for fire door ironmongery. The figure for your Ewell building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Ewell and neighbouring towns
Nearby towns we cover include Epsom, Sutton and Banstead. Distance from Ewell does not change our guide prices, and the survey and quote are free.
Common questions
Is Ewell within your coverage area?
It is. We cover Ewell in Surrey and neighbouring towns such as Epsom. There is no charge for the survey.
Can you work from an existing inspection report for my Ewell building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can I fit a new lock to a fire door?
Only one that is covered by the door's test evidence, fitted with the correct intumescent protection. A larger lock body or new holes can compromise the door.
Do fire doors need signs?
Most fire doors in non-domestic buildings and common parts should carry signage showing whether they are to be kept shut, kept locked or are automatic.