Fire door ironmongery for Esher buildings
From the KT10 postcode district outwards, we take on fire door ironmongery across Esher for homes, blocks and workplaces.
Buildings in and around Esher range from HMOs to schools and industrial estates. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Esher we replace them with hardware covered by each door's evidence. Signage for fire doors in Esher buildings is fitted as part of the job, not as an afterthought.
Common hardware defects
Inspections regularly find missing hinge screws, mismatched hinges, plastic-bodied latches, unapproved bolts and locks fitted without intumescent protection. We replace them with items covered by the door's evidence and fit the matching pads and linings.
What you get:
- Bolts and selectors where specified
- Fire-rated hinges, commonly grade 13
- Intumescent pads and lock linings
- Fire door signage
Fire door law for Esher properties
Fire doors in Esher fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Esher above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Which buildings in Esher need fire door ironmongery?
You are most likely to need fire door ironmongery if you look after blocks of flats, schools or hotels. Whatever the building in Esher, we survey each opening and tell you which doors need work and which do not.
The steps on a Esher installation
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
Prices for fire door ironmongery in Esher
As a guide, budget from £40 for minor items to £350 for a full hardware set per door, ex VAT for fire door ironmongery. The figure for your Esher building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Covering Esher and nearby
We also cover towns near Esher, including Walton-on-Thames (3.7 km away), Hampton and Sunbury-on-Thames. If your building is in KT10 or a neighbouring district, the service and pricing are the same.
Questions
Is Esher within your coverage area?
It is. We cover Esher in Surrey and neighbouring towns such as Walton-on-Thames. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Can I fit a new lock to a fire door?
Only one that is covered by the door's test evidence, fitted with the correct intumescent protection. A larger lock body or new holes can compromise the door.
Do fire doors need signs?
Most fire doors in non-domestic buildings and common parts should carry signage showing whether they are to be kept shut, kept locked or are automatic.