Fire door ironmongery in Sudbury, done to the evidence
From the CO10 postcode district outwards, we take on fire door ironmongery across Sudbury for homes, blocks and workplaces.
Fire doors in Sudbury protect escape routes in small offices, family homes after loft conversions and houses with integral garages alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Sudbury we replace them with hardware covered by each door's evidence. We supply ironmongery for Sudbury fire doors that matches each door's test evidence.
Why hardware choice matters
Fire doors are tested with particular hardware. Hinges hold the door in place as it heats up; locks and latches keep it shut against fire pressure; their holes are protected with intumescent linings. Swapping in a cheaper hinge, a larger lock body or a lever on a spindle that melts can change how the door behaves. Hinges for fire doors are commonly grade 13 to BS EN 1935.
As standard, the work covers:
- Fire-rated hinges, commonly grade 13
- Lever handles, pull handles and push plates
- Bolts and selectors where specified
- Locks and latches covered by the evidence
Fire door law for Sudbury properties
Fire doors in Sudbury fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Sudbury above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Which buildings in Sudbury need fire door ironmongery?
From schools to hotels, the requirement for fire door ironmongery in Sudbury comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
The steps on a Sudbury installation
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
Budgeting for fire door ironmongery in Sudbury
If you need a budget figure first, the guide for fire door ironmongery is from £40 for minor items to £350 for a full hardware set per door, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Sudbury and neighbouring towns
We also cover towns near Sudbury, including Colchester (20.4 km away), Haverhill and Braintree. If your building is in CO10 or a neighbouring district, the service and pricing are the same.
Questions
Do you cover CO10 and nearby postcodes?
Yes. We cover Sudbury including CO10, and nearby towns such as Colchester and Haverhill. The survey and written quote are free.
What happens on a survey in Sudbury?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do fire doors need signs?
Most fire doors in non-domestic buildings and common parts should carry signage showing whether they are to be kept shut, kept locked or are automatic.
Can I fit a new lock to a fire door?
Only one that is covered by the door's test evidence, fitted with the correct intumescent protection. A larger lock body or new holes can compromise the door.