Fire door ironmongery in Bury St Edmunds, done to the evidence
Our fire door ironmongery service in Bury St Edmunds is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Bury St Edmunds has a broad mix of buildings, including small blocks of flats, houses with integral garages and family homes after loft conversions, and the same fire door principles apply to all of them.
Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Bury St Edmunds we replace them with hardware covered by each door's evidence. We supply ironmongery for Bury St Edmunds fire doors that matches each door's test evidence.
Why hardware choice matters
Fire doors are tested with particular hardware. Hinges hold the door in place as it heats up; locks and latches keep it shut against fire pressure; their holes are protected with intumescent linings. Swapping in a cheaper hinge, a larger lock body or a lever on a spindle that melts can change how the door behaves. Hinges for fire doors are commonly grade 13 to BS EN 1935.
Each installation includes:
- Locks and latches covered by the evidence
- Bolts and selectors where specified
- Intumescent pads and lock linings
- Lever handles, pull handles and push plates
What the rules say for Bury St Edmunds
Fire doors in Bury St Edmunds fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Bury St Edmunds above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Which buildings in Bury St Edmunds need fire door ironmongery?
You are most likely to need fire door ironmongery if you look after offices, schools or HMOs. Whatever the building in Bury St Edmunds, we survey each opening and tell you which doors need work and which do not.
Our process in Bury St Edmunds
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
Budgeting for fire door ironmongery in Bury St Edmunds
Guide pricing for fire door ironmongery: from £40 for minor items to £350 for a full hardware set per door, ex VAT. Volume work across several doors in one Bury St Edmunds building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Bury St Edmunds and neighbouring towns
Bury St Edmunds is about 36.8 km from Ipswich, and we cover both, along with nearby Thetford and Stowmarket. Send us your postcode and we'll confirm survey dates.
Common questions
Do you work in Bury St Edmunds?
Yes, we take on fire door ironmongery in Bury St Edmunds and the surrounding area, including Thetford and Stowmarket. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Bury St Edmunds?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do fire doors need signs?
Most fire doors in non-domestic buildings and common parts should carry signage showing whether they are to be kept shut, kept locked or are automatic.
Can I fit a new lock to a fire door?
Only one that is covered by the door's test evidence, fitted with the correct intumescent protection. A larger lock body or new holes can compromise the door.