Getting fire door ironmongery right in Barnet
We provide fire door ironmongery in Barnet (EN5 and the surrounding postcodes), from the first survey through to a documented handover.
Around Barnet, mixed-use office buildings, purpose-built blocks of flats and schools all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
Signage for fire doors in Barnet buildings is fitted as part of the job, not as an afterthought. Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Barnet we replace them with hardware covered by each door's evidence.
Common hardware defects
Inspections regularly find missing hinge screws, mismatched hinges, plastic-bodied latches, unapproved bolts and locks fitted without intumescent protection. We replace them with items covered by the door's evidence and fit the matching pads and linings.
On a typical job that means:
- Locks and latches covered by the evidence
- Fire-rated hinges, commonly grade 13
- Fire door signage
- Bolts and selectors where specified
The regulations behind fire doors in Barnet
England's framework applies in Barnet. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors. Enforcement of fire safety law in Barnet sits with the London Fire Brigade.
For blocks over 11 metres in Barnet, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Who needs fire door ironmongery in Barnet?
The need for fire door ironmongery usually arises in offices or blocks of flats, and sometimes schools. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Barnet to keep escape routes protected throughout.
The steps on a Barnet installation
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
Prices for fire door ironmongery in Barnet
If you need a budget figure first, the guide for fire door ironmongery is from £40 for minor items to £350 for a full hardware set per door, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Barnet and neighbouring towns
We also cover towns near Barnet, including Hadley Wood (2.8 km away), Potters Bar and Borehamwood. If your building is in EN5 or a neighbouring district, the service and pricing are the same.
Common questions
Do you work in Barnet?
Yes, we take on fire door ironmongery in Barnet and the surrounding area, including Hadley Wood and Potters Bar. Send your postcode and a few details and we'll come back with survey dates.
How quickly can you survey in Barnet?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Are brass hinges acceptable on fire doors?
Only if they are fire tested and covered by the door's evidence. Many decorative hinges are not.
Can I fit a new lock to a fire door?
Only one that is covered by the door's test evidence, fitted with the correct intumescent protection. A larger lock body or new holes can compromise the door.