Fire door ironmongery in Hanworth: what's involved
Our fire door ironmongery service in Hanworth is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
In and around Hanworth, fire door work covers everything from student accommodation to mixed-use office buildings. We plan each job around the people who use the building.
Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Hanworth we replace them with hardware covered by each door's evidence. Signage for fire doors in Hanworth buildings is fitted as part of the job, not as an afterthought.
Why hardware choice matters
Fire doors are tested with particular hardware. Hinges hold the door in place as it heats up; locks and latches keep it shut against fire pressure; their holes are protected with intumescent linings. Swapping in a cheaper hinge, a larger lock body or a lever on a spindle that melts can change how the door behaves. Hinges for fire doors are commonly grade 13 to BS EN 1935.
On a typical job that means:
- Fire-rated hinges, commonly grade 13
- Locks and latches covered by the evidence
- Lever handles, pull handles and push plates
- Fire door signage
What the rules say for Hanworth
In Hanworth, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet. In London, the London Fire Brigade is the enforcing authority for fire safety law.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Hanworth building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Which buildings in Hanworth need fire door ironmongery?
From schools to offices, the requirement for fire door ironmongery in Hanworth comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
How a Hanworth job runs
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
What does fire door ironmongery cost in Hanworth?
Guide pricing for fire door ironmongery: from £40 for minor items to £350 for a full hardware set per door, ex VAT. Volume work across several doors in one Hanworth building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Nearby areas we cover from Hanworth
We also cover towns near Hanworth, including Hampton (2.5 km away), Feltham and Sunbury-on-Thames. If your building is in TW13 or a neighbouring district, the service and pricing are the same.
Questions
Do you work in Hanworth?
Yes, we take on fire door ironmongery in Hanworth and the surrounding area, including Hampton and Feltham. Send your postcode and a few details and we'll come back with survey dates.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Do fire doors need signs?
Most fire doors in non-domestic buildings and common parts should carry signage showing whether they are to be kept shut, kept locked or are automatic.
Can I fit a new lock to a fire door?
Only one that is covered by the door's test evidence, fitted with the correct intumescent protection. A larger lock body or new holes can compromise the door.