Fire door ironmongery in Borehamwood: what's involved
From the WD6 postcode district outwards, we take on fire door ironmongery across Borehamwood for homes, blocks and workplaces.
Around Borehamwood, houses with integral garages, care homes and family homes after loft conversions all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
We supply ironmongery for Borehamwood fire doors that matches each door's test evidence. Signage for fire doors in Borehamwood buildings is fitted as part of the job, not as an afterthought.
Common hardware defects
Inspections regularly find missing hinge screws, mismatched hinges, plastic-bodied latches, unapproved bolts and locks fitted without intumescent protection. We replace them with items covered by the door's evidence and fit the matching pads and linings.
On a typical job that means:
- Locks and latches covered by the evidence
- Lever handles, pull handles and push plates
- Bolts and selectors where specified
- Fire door signage
What the rules say for Borehamwood
The rules that apply to fire doors in Borehamwood are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Borehamwood block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Who needs fire door ironmongery in Borehamwood?
You are most likely to need fire door ironmongery if you look after schools, blocks of flats or HMOs. Whatever the building in Borehamwood, we survey each opening and tell you which doors need work and which do not.
From enquiry to handover in Borehamwood
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
What does fire door ironmongery cost in Borehamwood?
Budget around from £40 for minor items to £350 for a full hardware set per door, ex VAT for fire door ironmongery. Our guide prices are the same in Borehamwood as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Covering Borehamwood and nearby
Borehamwood is about 8.2 km from Watford, and we cover both, along with nearby Barnet and Bushey. Send us your postcode and we'll confirm survey dates.
Common questions
Is Borehamwood within your coverage area?
It is. We cover Borehamwood in Hertfordshire and neighbouring towns such as Barnet. There is no charge for the survey.
How quickly can you survey in Borehamwood?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Can I fit a new lock to a fire door?
Only one that is covered by the door's test evidence, fitted with the correct intumescent protection. A larger lock body or new holes can compromise the door.
How many hinges does a fire door need?
Usually at least three, of the type and grade specified in the door's evidence. Heavier or taller doors may need more.