Getting fire door frames right in Cumbria
For fire door frames anywhere in Cumbria, one team handles the survey, supply, installation and handover, covering Carlisle, Barrow-in-Furness, Kendal and the rest of the county.
In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Cumbria survey. Frame-to-wall gaps on Cumbria jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out.
Managing agents, landlords, schools, care providers, businesses and homeowners in Cumbria can all use one team for survey, supply, installation and evidence. We plan work around occupants and hand over a record for every door.
Why frames fail inspections
Many fire door problems start with the frame: softwood linings too thin for the door, frames cut back to fit a previous door, frames loose in the wall, or gaps behind the architrave stuffed with ordinary foam or left open. A perfect leaf hung in a frame like that cannot be relied on.
The regulations behind fire doors in Cumbria
Fire doors in Cumbria fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Cumbria above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
How a Cumbria job runs
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Guide prices in Cumbria
Budget around £250–£600 per frame replaced, fixed and sealed, ex VAT for fire door frames. Our guide prices are the same in Cumbria as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Common questions
Do you provide fire door frames across Cumbria?
Yes. We cover all of Cumbria, including Carlisle and Barrow-in-Furness. Surveys and written quotes are free.
Why do you photograph the frame before fitting architraves?
Because the fixing and sealing are hidden once the architraves go on. Photographs give you evidence that the hidden work was done correctly.
Can I use expanding foam around a fire door frame?
Only a fire-rated foam with evidence for that use and gap size. Ordinary expanding foam is not suitable.