What fire door frames in Whitehaven should include
If you need fire door frames in Whitehaven, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Fire doors in Whitehaven protect escape routes in houses with integral garages, schools and family homes after loft conversions alike. We adapt the programme to the building and its occupants, never the standard of the installation.
In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Whitehaven survey. We photograph every frame we fix in Whitehaven before the architraves go on, so the hidden work is on record.
Frames on their own
Where a leaf is sound but the frame is not, a new compatible frame can sometimes be fitted to the existing leaf, provided the combination is supported by the leaf's certification. More often, a frame replacement is part of a doorset installation.
As standard, the work covers:
- Fixing at specified centres with packing
- Assessment of frame condition and compatibility
- Photographs of fixing and sealing before covering
- Hardwood or certified frames to suit the door
Rules and responsibilities in Whitehaven
England's framework applies in Whitehaven. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Whitehaven, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Which buildings in Whitehaven need fire door frames?
Typical settings for fire door frames include converted houses, older blocks of flats and offices. In Whitehaven, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
How a Whitehaven job runs
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Budgeting for fire door frames in Whitehaven
If you need a budget figure first, the guide for fire door frames is £250–£600 per frame replaced, fixed and sealed, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Whitehaven and neighbouring towns
Whitehaven is about 56.6 km from Carlisle, and we cover both, along with nearby Workington and Barrow-in-Furness. Send us your postcode and we'll confirm survey dates.
Common questions
Is Whitehaven within your coverage area?
It is. We cover Whitehaven in Cumbria and neighbouring towns such as Workington. There is no charge for the survey.
How quickly can you survey in Whitehaven?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Why do you photograph the frame before fitting architraves?
Because the fixing and sealing are hidden once the architraves go on. Photographs give you evidence that the hidden work was done correctly.
Can I use expanding foam around a fire door frame?
Only a fire-rated foam with evidence for that use and gap size. Ordinary expanding foam is not suitable.