Fire door frames in Congleton: what's involved
When you book fire door frames in Congleton, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Fire doors in Congleton protect escape routes in small blocks of flats, houses with integral garages and care homes alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Frame-to-wall gaps on Congleton jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out. In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Congleton survey.
Frames on their own
Where a leaf is sound but the frame is not, a new compatible frame can sometimes be fitted to the existing leaf, provided the combination is supported by the leaf's certification. More often, a frame replacement is part of a doorset installation.
On a typical job that means:
- Frame-to-wall gap sealing with evidenced materials
- Fixing at specified centres with packing
- Photographs of fixing and sealing before covering
- Hardwood or certified frames to suit the door
Fire door law for Congleton properties
The rules that apply to fire doors in Congleton are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Congleton block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Buildings and duty holders in Congleton
From converted houses to schools, the requirement for fire door frames in Congleton comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
Our process in Congleton
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Guide prices in Congleton
If you need a budget figure first, the guide for fire door frames is £250–£600 per frame replaced, fixed and sealed, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Congleton and neighbouring towns
Neighbouring towns such as Kidsgrove, Macclesfield, Crewe and Stoke-on-Trent are covered too, so clients with several buildings can use one installer and one evidence format.
Questions
Do you work in Congleton?
Yes, we take on fire door frames in Congleton and the surrounding area, including Kidsgrove and Macclesfield. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Congleton?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Can a new frame be fitted to my existing door?
Sometimes, if the frame is compatible with the door's certification. Often it is simpler and better evidenced to replace the whole doorset.
What is the frame-to-wall gap?
It is the space between the door frame and the surrounding wall, normally hidden by the architrave. If it is not filled with a suitable fire-resisting material, fire and smoke can pass around the door.