Getting FD60 fire doors right in Oxfordshire
Across Oxfordshire, from Oxford to Banbury, we survey, supply and fit FD60 fire doors for homes, blocks of flats and workplaces.
Before ordering FD60 doors for a Oxfordshire building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer. For FD60 work in Oxfordshire we generally fit certified doorsets, so frame and leaf share the same test evidence.
Wherever your building is in Oxfordshire, the fire safety duties come from national rules, and our installation standard is the same.
What do you hand over at the end?
For every FD60 opening we record the product and certificate reference, the gap measurements, the hinge and closer specification, how the frame was fixed and what was used to seal the frame-to-structure gap, with photographs before the architraves go on. That record is what your fire risk assessor or building control officer will ask for.
Which fire door rules apply in Oxfordshire?
Fire doors in Oxfordshire fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Oxfordshire above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
From enquiry to handover in Oxfordshire
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Prices for FD60 fire doors in Oxfordshire
If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
FD60 fire doors questions
Do you provide FD60 fire doors across Oxfordshire?
Yes. We cover all of Oxfordshire, including Oxford and Banbury. Surveys and written quotes are free.
Can I upgrade an FD30 door to FD60?
Not by adding parts. An FD30 leaf cannot be turned into an FD60 door with extra strips or paint. If an opening needs 60 minutes, the leaf, and usually the frame, need to be replaced with a certified FD60 product.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.