FD60 fire doors in Bicester

FD60 fire doors: our service in Bicester

When you book FD60 fire doors in Bicester, the aim is simple: doors that close, latch and seal as tested, with records that prove it.

Around Bicester, small blocks of flats, light industrial buildings and houses with integral garages all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.

Before ordering FD60 doors for a Bicester building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer. For FD60 work in Bicester we generally fit certified doorsets, so frame and leaf share the same test evidence.

What do you hand over at the end?

For every FD60 opening we record the product and certificate reference, the gap measurements, the hinge and closer specification, how the frame was fixed and what was used to seal the frame-to-structure gap, with photographs before the architraves go on. That record is what your fire risk assessor or building control officer will ask for.

Each installation includes:

• Certified FD60 doorset or leaf with matching evidence
• 60-minute glazing systems where vision panels are needed
• Check of the fire strategy rating for each opening
• Frame fixing and structural gap sealing recorded with photos

Rules and responsibilities in Bicester

England's framework applies in Bicester. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Bicester, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Which buildings in Bicester need FD60 fire doors?

The need for FD60 fire doors usually arises in mixed-use commercial buildings or plant and boiler rooms, and sometimes stair cores in taller blocks. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Bicester to keep escape routes protected throughout.

From enquiry to handover in Bicester

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

What does FD60 fire doors cost in Bicester?

As a guide, budget £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. The figure for your Bicester building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Bicester and neighbouring towns

Nearby towns we cover include Oxford, Banbury and Aylesbury. Distance from Bicester does not change our guide prices, and the survey and quote are free.

Questions from Bicester