FD60 fire doors in Oxford

FD60 fire doors: our service in Oxford

Looking for FD60 fire doors in Oxford? We supply and fit certified fire doors and components across Oxford and the wider Oxfordshire area, working from a free survey and a fixed written quote.

Oxford has a broad mix of buildings, including industrial units, purpose-built flats and GP surgeries, and the same fire door principles apply to all of them.

FD60 openings in Oxford buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Oxford we generally fit certified doorsets, so frame and leaf share the same test evidence.

When does a building need FD60 rather than FD30?

FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.

We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.

What you get:

• Certified FD60 doorset or leaf with matching evidence
• 60-minute glazing systems where vision panels are needed
• Intumescent and smoke seals as specified
• Load-rated hinges and correctly powered closer

Rules and responsibilities in Oxford

England's framework applies in Oxford. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Oxford, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Where FD60 fire doors fit in Oxford

Typical settings for FD60 fire doors include mixed-use commercial buildings, stair cores in taller blocks and refuse stores. In Oxford, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

How a Oxford job runs

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

Prices for FD60 fire doors in Oxford

If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Oxford and neighbouring towns

As well as Oxford, we cover neighbouring towns including Abingdon, Didcot and Witney. The survey and quote are free.

Common questions