Getting FD60 fire doors right in Airdrie
When you book FD60 fire doors in Airdrie, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
In and around Airdrie, fire door work covers everything from small blocks of flats to schools. We plan each job around the people who use the building.
For FD60 work in Airdrie we generally fit certified doorsets, so frame and leaf share the same test evidence. FD60 openings in Airdrie buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises.
What do you hand over at the end?
For every FD60 opening we record the product and certificate reference, the gap measurements, the hinge and closer specification, how the frame was fixed and what was used to seal the frame-to-structure gap, with photographs before the architraves go on. That record is what your fire risk assessor or building control officer will ask for.
What you get:
- Check of the fire strategy rating for each opening
- Intumescent and smoke seals as specified
- 60-minute glazing systems where vision panels are needed
- Certified FD60 doorset or leaf with matching evidence
The regulations behind fire doors in Airdrie
In Airdrie, fire doors are specified against Scotland's Technical Handbooks (Section 2: Fire) under the Building (Scotland) Regulations 2004, rather than Approved Document B. Duties in non-domestic premises come from the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006.
England's regulation 10 does not apply in Scotland. We follow the building's fire risk assessment and, where building work needs a warrant, the local authority's requirements.
Where FD60 fire doors fit in Airdrie
From mixed-use commercial buildings to stair cores in taller blocks, the requirement for FD60 fire doors in Airdrie comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
Our process in Airdrie
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
What does FD60 fire doors cost in Airdrie?
If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Covering Airdrie and nearby
Nearby towns we cover include Coatbridge, Motherwell and Cumbernauld. Distance from Airdrie does not change our guide prices, and the survey and quote are free.
Questions from Airdrie
Is Airdrie within your coverage area?
It is. We cover Airdrie in Lanarkshire and neighbouring towns such as Coatbridge. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Do FD60 doors need smoke seals?
If the fire strategy asks for smoke control, yes: the door will be specified as FD60S or E60Sa with smoke seals. Many plant room doors are FD60 without a smoke requirement.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.