FD60 fire doors in Coatbridge, done to the evidence
Our FD60 fire doors service covers Coatbridge and the wider Lanarkshire area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Around Coatbridge, houses with integral garages, small offices and family homes after loft conversions all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
For FD60 work in Coatbridge we generally fit certified doorsets, so frame and leaf share the same test evidence. FD60 openings in Coatbridge buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises.
What do you hand over at the end?
For every FD60 opening we record the product and certificate reference, the gap measurements, the hinge and closer specification, how the frame was fixed and what was used to seal the frame-to-structure gap, with photographs before the architraves go on. That record is what your fire risk assessor or building control officer will ask for.
What you get:
- Intumescent and smoke seals as specified
- Frame fixing and structural gap sealing recorded with photos
- Check of the fire strategy rating for each opening
- Load-rated hinges and correctly powered closer
The regulations behind fire doors in Coatbridge
In Coatbridge, fire doors are specified against Scotland's Technical Handbooks (Section 2: Fire) under the Building (Scotland) Regulations 2004, rather than Approved Document B. Duties in non-domestic premises come from the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006.
England's regulation 10 does not apply in Scotland. We follow the building's fire risk assessment and, where building work needs a warrant, the local authority's requirements.
Buildings and duty holders in Coatbridge
The need for FD60 fire doors usually arises in plant and boiler rooms or mixed-use commercial buildings, and sometimes refuse stores. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Coatbridge to keep escape routes protected throughout.
What happens after you enquire
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Budgeting for FD60 fire doors in Coatbridge
Budget around £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. Our guide prices are the same in Coatbridge as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Coatbridge and neighbouring towns
We also cover towns near Coatbridge, including Airdrie (2.8 km away), Motherwell and Cumbernauld. If your building is in ML5 or a neighbouring district, the service and pricing are the same.
Common questions
Do you cover ML5 and nearby postcodes?
Yes. We cover Coatbridge including ML5, and nearby towns such as Airdrie and Motherwell. The survey and written quote are free.
What happens on a survey in Coatbridge?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Are FD60 doors harder to open?
They are heavier, so the closer has to be chosen and adjusted with care. A well-set closer will still close and latch the door while keeping the opening force reasonable for the people who use it.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.