What certified fire doorsets in Airdrie should include
Our certified fire doorsets service covers Airdrie and the wider Lanarkshire area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Buildings in and around Airdrie range from small offices to houses with integral garages and small blocks of flats. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Doorsets suit refurbishment programmes in Airdrie, where several openings can be measured, ordered and fitted in one planned sequence. Every doorset we fit in Airdrie is handed over with its certificate reference and photographs of the frame fixing and gap sealing.
How is a doorset installed?
The opening is prepared to the size and tolerances in the manufacturer's instructions. The frame is fixed with the specified fixings at the specified centres, packed where needed, and checked for square, plumb and twist. The gap between frame and wall is then sealed with a material covered by the evidence, which BS 8214:2026 now describes in more detail. Finally the leaf is adjusted, the closer is set and the assembly is tested before the architraves go on.
Each installation includes:
- Frame fixing and frame-to-wall gap sealing
- Certificate references and photo record per opening
- Closer set-up and close-and-latch testing
- Pre-hung, pre-machined doorsets where available
Which fire door rules apply in Airdrie?
Airdrie is in Scotland, which has its own system. Building work, including many fire door replacements, is governed by the Building (Scotland) Regulations 2004 and the Technical Handbooks, with Section 2 covering fire; where a building warrant is needed it comes from the local authority. In non-domestic premises, the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 set the duties.
The common parts of private blocks of flats largely sit outside Part 3 of the 2005 Act, so the fire risk assessment and housing obligations usually drive fire door work in residential buildings in Airdrie.
Buildings and duty holders in Airdrie
Typical settings for certified fire doorsets include new-build and conversion projects, blocks of flats and refurbishment programmes. In Airdrie, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
How a Airdrie job runs
- Survey and measure every structural opening
- Specify doorsets by rating, size, hand, finish and hardware
- Prepare openings and remove existing doors and linings
- Fix and seal the frames to the structure
- Hang, adjust and test each leaf and closer
- Fit architraves, make good and hand over evidence
Guide prices in Airdrie
Guide pricing for certified fire doorsets: £650–£1,300 for an FD30 doorset and £850–£1,800 for FD60, supplied and fitted, ex VAT. Volume work across several doors in one Airdrie building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Covering Airdrie and nearby
Airdrie is about 16.7 km from East Kilbride, and we cover both, along with nearby Coatbridge and Motherwell. Send us your postcode and we'll confirm survey dates.
Common questions
Is Airdrie within your coverage area?
It is. We cover Airdrie in Lanarkshire and neighbouring towns such as Coatbridge. There is no charge for the survey.
Can you work from an existing inspection report for my Airdrie building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can a doorset be fitted into an existing opening?
Usually, yes. Doorsets are made to fit the structural opening once the old frame is removed. We measure the opening on the survey so the doorset is made to the right size and the gaps to the wall stay within what the evidence allows.
Are doorsets more expensive than a leaf?
The product costs more, but the labour is often lower and the result is better evidenced. Where a frame would need replacing anyway, a doorset is usually the better value.