FD60 fire doors in Ayrshire, done to the evidence
We provide FD60 fire doors across Ayrshire, covering 3 towns and 31 postcode districts, including Kilmarnock, Ayr and Irvine.
Before ordering FD60 doors for a Ayrshire building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer. For FD60 work in Ayrshire we generally fit certified doorsets, so frame and leaf share the same test evidence.
Managing agents, landlords, schools, care providers, businesses and homeowners in Ayrshire can all use one team for survey, supply, installation and evidence. We plan work around occupants and hand over a record for every door.
Why FD60 installation is less forgiving
A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.
Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.
Rules and responsibilities in Ayrshire
Scottish rules apply to fire doors in Ayrshire. The Technical Handbooks under the Building (Scotland) Regulations 2004 set the standard for new and altered doors, and the local authority issues building warrants where they are needed. Workplaces and other non-domestic premises are covered by the Fire (Scotland) Act 2005.
Residential common parts in Ayrshire are treated differently from England, so we check the fire risk assessment and any landlord or factor requirements before specifying work.
The steps on a Ayrshire installation
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Guide prices in Ayrshire
Budget around £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. Our guide prices are the same in Ayrshire as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
FD60 fire doors questions
Do you provide FD60 fire doors across Ayrshire?
Yes. We cover all of Ayrshire, including Kilmarnock and Ayr. Surveys and written quotes are free.
Can I upgrade an FD30 door to FD60?
Not by adding parts. An FD30 leaf cannot be turned into an FD60 door with extra strips or paint. If an opening needs 60 minutes, the leaf, and usually the frame, need to be replaced with a certified FD60 product.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.