What FD30 fire doors in Redditch should include
When you book FD30 fire doors in Redditch, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
In and around Redditch, fire door work covers everything from industrial estates to houses with integral garages. We plan each job around the people who use the building.
In Redditch, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. For a mixed portfolio in Redditch, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side.
Leaf only or a full doorset?
If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.
We tell you which route each opening needs on the survey, door by door, and why.
On a typical job that means:
- Overhead closer set to close and latch
- Survey of the opening, frame and existing ironmongery
- Photo record, product data and certificate references at handover
- Frame-to-wall gap sealed with an evidenced material
What the rules say for Redditch
The rules that apply to fire doors in Redditch are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Redditch block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Which buildings in Redditch need FD30 fire doors?
The need for FD30 fire doors usually arises in blocks of flats or schools, and sometimes shops. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Redditch to keep escape routes protected throughout.
What happens after you enquire
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
What does FD30 fire doors cost in Redditch?
Guide pricing for FD30 fire doors: £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. Volume work across several doors in one Redditch building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Around Redditch
Redditch is about 22.8 km from Worcester, and we cover both, along with nearby Bromsgrove and Shirley. Send us your postcode and we'll confirm survey dates.
Common questions
Is Redditch within your coverage area?
It is. We cover Redditch in Worcestershire and neighbouring towns such as Bromsgrove. There is no charge for the survey.
How quickly can you survey in Redditch?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Do FD30 doors need a closer?
Most do. Doors on escape routes, flat entrance doors and doors in the common parts of buildings need a self-closing device that shuts and latches the door. Some doors inside houses and locked riser doors are exceptions, depending on the fire strategy.
Can a new FD30 door go into my old frame?
Sometimes. The frame has to be sound, square, securely fixed and compatible with the new leaf's certification. Many older frames are not, especially softwood linings or frames altered for previous doors. We check each frame on the survey and recommend a doorset only where the frame cannot be relied on.