FD30 fire doors in Great Malvern

FD30 fire doors in Great Malvern: what's involved

We provide FD30 fire doors in Great Malvern (WR14 and the surrounding postcodes), from the first survey through to a documented handover.

Great Malvern has a broad mix of buildings, including care homes, schools and small offices, and the same fire door principles apply to all of them.

For a mixed portfolio in Great Malvern, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side. Each FD30 leaf we supply for Great Malvern is sized for the opening, rather than trimmed beyond what its certification allows.

Leaf only or a full doorset?

If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.

We tell you which route each opening needs on the survey, door by door, and why.

What you get:

• Overhead closer set to close and latch
• Survey of the opening, frame and existing ironmongery
• Certified FD30 or FD30S leaf, or full doorset
• Frame-to-wall gap sealed with an evidenced material

Fire door law for Great Malvern properties

The rules that apply to fire doors in Great Malvern are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.

Where a Great Malvern block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.

Where FD30 fire doors fit in Great Malvern

The need for FD30 fire doors usually arises in blocks of flats or offices, and sometimes schools. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Great Malvern to keep escape routes protected throughout.

How a Great Malvern job runs

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

What does FD30 fire doors cost in Great Malvern?

Guide pricing for FD30 fire doors: £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. Volume work across several doors in one Great Malvern building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Great Malvern and neighbouring towns

Neighbouring towns such as Worcester, Tewkesbury, Droitwich and Stourport-on-Severn are covered too, so clients with several buildings can use one installer and one evidence format.

Questions from Great Malvern