FD30 fire doors: our service in Haywards Heath
From the RH16 postcode district outwards, we take on FD30 fire doors across Haywards Heath for homes, blocks and workplaces.
In and around Haywards Heath, fire door work covers everything from schools to family homes after loft conversions. We plan each job around the people who use the building.
For a mixed portfolio in Haywards Heath, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side. Each FD30 leaf we supply for Haywards Heath is sized for the opening, rather than trimmed beyond what its certification allows.
Where are FD30 doors used?
FD30 is the rating most buildings rely on. You will find it on flat entrance doors, doors onto escape corridors and stairs in houses in multiple occupation, kitchen doors in HMOs, and most internal doors on escape routes in offices, schools, surgeries and shops. Where smoke control matters too, the door is specified as FD30S (E30Sa), which adds a smoke seal and a tighter threshold.
The rating your building needs comes from its fire strategy or fire risk assessment, not from the door supplier. If you are unsure whether a door should be FD30 or FD60, we check the drawings, the risk assessment and what is installed now before we price anything. Our FD30 vs FD60 guide explains the difference.
As standard, the work covers:
- Overhead closer set to close and latch
- Fire-tested hinges, latch or lock and intumescent pads
- Certified FD30 or FD30S leaf, or full doorset
- Frame-to-wall gap sealed with an evidenced material
Which fire door rules apply in Haywards Heath?
The rules that apply to fire doors in Haywards Heath are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Haywards Heath block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Where FD30 fire doors fit in Haywards Heath
You are most likely to need FD30 fire doors if you look after offices, care homes or blocks of flats. Whatever the building in Haywards Heath, we survey each opening and tell you which doors need work and which do not.
Our process in Haywards Heath
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Guide prices in Haywards Heath
As a guide, budget £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. The figure for your Haywards Heath building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Haywards Heath and neighbouring towns
Nearby towns we cover include Burgess Hill, Crawley and East Grinstead. Distance from Haywards Heath does not change our guide prices, and the survey and quote are free.
Questions from Haywards Heath
Do you cover RH16 and nearby postcodes?
Yes. We cover Haywards Heath including RH16, and nearby towns such as Burgess Hill and Crawley. The survey and written quote are free.
How quickly can you survey in Haywards Heath?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
What is the difference between FD30 and FD30S?
FD30S has been tested for smoke control as well as fire. It adds a smoke seal, usually a brush or blade, and needs a tight threshold gap. Flat entrance doors and doors onto protected escape routes are commonly specified as FD30S.
Do FD30 doors need a closer?
Most do. Doors on escape routes, flat entrance doors and doors in the common parts of buildings need a self-closing device that shuts and latches the door. Some doors inside houses and locked riser doors are exceptions, depending on the fire strategy.