FD30 fire doors in Redhill: what's involved
Looking for FD30 fire doors in Redhill? We supply and fit certified fire doors and components across Redhill and the wider Surrey area, working from a free survey and a fixed written quote.
In and around Redhill, fire door work covers everything from low-rise blocks of flats to care homes. We plan each job around the people who use the building.
Each FD30 leaf we supply for Redhill is sized for the opening, rather than trimmed beyond what its certification allows. In Redhill, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes.
What does a correct FD30 installation include?
A typical timber FD30 leaf is around 44mm thick and hangs on at least three fire-tested hinges. The gaps between leaf and frame are set to the manufacturer's data, usually around 3mm. Intumescent strips, and smoke seals where needed, go in the frame or leaf edge as specified. The closer must pull the door shut and latch it from any angle. Every hole cut for a lock, latch or hinge is lined with intumescent material where the certification calls for it.
Then comes the part that is often skipped: sealing the gap between the frame and the wall with a tested material, as BS 8214:2026 now sets out in more detail.
Each installation includes:
- Overhead closer set to close and latch
- Fire-tested hinges, latch or lock and intumescent pads
- Frame-to-wall gap sealed with an evidenced material
- Intumescent strips and smoke seals to the certification
What the rules say for Redhill
The rules that apply to fire doors in Redhill are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Redhill block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Buildings and duty holders in Redhill
Landlords, managing agents, facilities teams and homeowners in Redhill can all commission FD30 fire doors from us. The usual settings are schools and shops, though single doors for HMOs are just as welcome.
From enquiry to handover in Redhill
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Budgeting for FD30 fire doors in Redhill
Budget around £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. Our guide prices are the same in Redhill as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Redhill and neighbouring towns
We also cover towns near Redhill, including Reigate (2.5 km away), Horley and Caterham. If your building is in RH1 or a neighbouring district, the service and pricing are the same.
Questions from Redhill
Do you work in Redhill?
Yes, we take on FD30 fire doors in Redhill and the surrounding area, including Reigate and Horley. Send your postcode and a few details and we'll come back with survey dates.
How quickly can you survey in Redhill?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Do FD30 doors need a closer?
Most do. Doors on escape routes, flat entrance doors and doors in the common parts of buildings need a self-closing device that shuts and latches the door. Some doors inside houses and locked riser doors are exceptions, depending on the fire strategy.
Can a new FD30 door go into my old frame?
Sometimes. The frame has to be sound, square, securely fixed and compatible with the new leaf's certification. Many older frames are not, especially softwood linings or frames altered for previous doors. We check each frame on the survey and recommend a doorset only where the frame cannot be relied on.