FD30 fire doors in Guildford

FD30 fire doors: our service in Guildford

From the GU1 postcode district outwards, we take on FD30 fire doors across Guildford for homes, blocks and workplaces.

In and around Guildford, fire door work covers everything from care homes to houses with integral garages. We plan each job around the people who use the building.

Each FD30 leaf we supply for Guildford is sized for the opening, rather than trimmed beyond what its certification allows. In Guildford, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes.

Where are FD30 doors used?

FD30 is the rating most buildings rely on. You will find it on flat entrance doors, doors onto escape corridors and stairs in houses in multiple occupation, kitchen doors in HMOs, and most internal doors on escape routes in offices, schools, surgeries and shops. Where smoke control matters too, the door is specified as FD30S (E30Sa), which adds a smoke seal and a tighter threshold.

The rating your building needs comes from its fire strategy or fire risk assessment, not from the door supplier. If you are unsure whether a door should be FD30 or FD60, we check the drawings, the risk assessment and what is installed now before we price anything. Our FD30 vs FD60 guide explains the difference.

On a typical job that means:

• Fire-tested hinges, latch or lock and intumescent pads
• Survey of the opening, frame and existing ironmongery
• Certified FD30 or FD30S leaf, or full doorset
• Overhead closer set to close and latch

Rules and responsibilities in Guildford

England's framework applies in Guildford. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Guildford, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Where FD30 fire doors fit in Guildford

Landlords, managing agents, facilities teams and homeowners in Guildford can all commission FD30 fire doors from us. The usual settings are schools and blocks of flats, though single doors for HMOs are just as welcome.

Our process in Guildford

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

What does FD30 fire doors cost in Guildford?

As a guide, budget £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. The figure for your Guildford building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Around Guildford

Neighbouring towns such as Godalming, Woking, Aldershot and Farnborough are covered too, so clients with several buildings can use one installer and one evidence format.

Common questions