Getting FD30 fire doors right in Banbury
Our FD30 fire doors service covers Banbury and the wider Oxfordshire area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
In and around Banbury, fire door work covers everything from care homes to houses with integral garages. We plan each job around the people who use the building.
In Banbury, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. Each FD30 leaf we supply for Banbury is sized for the opening, rather than trimmed beyond what its certification allows.
Where are FD30 doors used?
FD30 is the rating most buildings rely on. You will find it on flat entrance doors, doors onto escape corridors and stairs in houses in multiple occupation, kitchen doors in HMOs, and most internal doors on escape routes in offices, schools, surgeries and shops. Where smoke control matters too, the door is specified as FD30S (E30Sa), which adds a smoke seal and a tighter threshold.
The rating your building needs comes from its fire strategy or fire risk assessment, not from the door supplier. If you are unsure whether a door should be FD30 or FD60, we check the drawings, the risk assessment and what is installed now before we price anything. Our FD30 vs FD60 guide explains the difference.
As standard, the work covers:
- Intumescent strips and smoke seals to the certification
- Frame-to-wall gap sealed with an evidenced material
- Survey of the opening, frame and existing ironmongery
- Fire-tested hinges, latch or lock and intumescent pads
Which fire door rules apply in Banbury?
England's framework applies in Banbury. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Banbury, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Who needs FD30 fire doors in Banbury?
The need for FD30 fire doors usually arises in care homes or schools, and sometimes offices. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Banbury to keep escape routes protected throughout.
The steps on a Banbury installation
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Budgeting for FD30 fire doors in Banbury
Budget around £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. Our guide prices are the same in Banbury as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Banbury and neighbouring towns
Banbury is about 35.1 km from Oxford, and we cover both, along with nearby Bicester and Daventry. Send us your postcode and we'll confirm survey dates.
Common questions
Is Banbury within your coverage area?
It is. We cover Banbury in Oxfordshire and neighbouring towns such as Bicester. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
What is the difference between FD30 and FD30S?
FD30S has been tested for smoke control as well as fire. It adds a smoke seal, usually a brush or blade, and needs a tight threshold gap. Flat entrance doors and doors onto protected escape routes are commonly specified as FD30S.
How long does it take to fit an FD30 door?
A leaf into a sound frame is often a few hours. A full doorset including frame removal, fixing, sealing and making good is usually half a day to a day per opening, depending on access and the wall construction.