FD30 fire doors in Loughborough

FD30 fire doors for Loughborough buildings

We provide FD30 fire doors in Loughborough (LE12 and the surrounding postcodes), from the first survey through to a documented handover.

Fire doors in Loughborough protect escape routes in schools, industrial estates and houses with integral garages alike. We adapt the programme to the building and its occupants, never the standard of the installation.

For a mixed portfolio in Loughborough, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side. Each FD30 leaf we supply for Loughborough is sized for the opening, rather than trimmed beyond what its certification allows.

What does a correct FD30 installation include?

A typical timber FD30 leaf is around 44mm thick and hangs on at least three fire-tested hinges. The gaps between leaf and frame are set to the manufacturer's data, usually around 3mm. Intumescent strips, and smoke seals where needed, go in the frame or leaf edge as specified. The closer must pull the door shut and latch it from any angle. Every hole cut for a lock, latch or hinge is lined with intumescent material where the certification calls for it.

Then comes the part that is often skipped: sealing the gap between the frame and the wall with a tested material, as BS 8214:2026 now sets out in more detail.

As standard, the work covers:

• Photo record, product data and certificate references at handover
• Survey of the opening, frame and existing ironmongery
• Frame-to-wall gap sealed with an evidenced material
• Certified FD30 or FD30S leaf, or full doorset

Fire door law for Loughborough properties

England's framework applies in Loughborough. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Loughborough, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Who needs FD30 fire doors in Loughborough?

You are most likely to need FD30 fire doors if you look after offices, HMOs or shops. Whatever the building in Loughborough, we survey each opening and tell you which doors need work and which do not.

How a Loughborough job runs

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

Prices for FD30 fire doors in Loughborough

If you need a budget figure first, the guide for FD30 fire doors is £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Covering Loughborough and nearby

Neighbouring towns such as Coalville, Leicester, Long Eaton and West Bridgford are covered too, so clients with several buildings can use one installer and one evidence format.

Questions