FD30 fire doors in Ramsgate

Getting FD30 fire doors right in Ramsgate

From the CT11 postcode district outwards, we take on FD30 fire doors across Ramsgate for homes, blocks and workplaces.

Ramsgate has a broad mix of buildings, including small blocks of flats, small offices and schools, and the same fire door principles apply to all of them.

In Ramsgate, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. For a mixed portfolio in Ramsgate, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side.

Leaf only or a full doorset?

If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.

We tell you which route each opening needs on the survey, door by door, and why.

Each installation includes:

• Fire-tested hinges, latch or lock and intumescent pads
• Frame-to-wall gap sealed with an evidenced material
• Photo record, product data and certificate references at handover
• Certified FD30 or FD30S leaf, or full doorset

Which fire door rules apply in Ramsgate?

England's framework applies in Ramsgate. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Ramsgate, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Where FD30 fire doors fit in Ramsgate

Typical settings for FD30 fire doors include HMOs, shops and care homes. In Ramsgate, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

Our process in Ramsgate

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

What does FD30 fire doors cost in Ramsgate?

Budget around £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. Our guide prices are the same in Ramsgate as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.

Covering Ramsgate and nearby

Nearby towns we cover include Broadstairs, Margate and Deal. Distance from Ramsgate does not change our guide prices, and the survey and quote are free.

Common questions