Fire door hold-open devices in Ramsgate, done to the evidence
Our fire door hold-open devices service covers Ramsgate and the wider Kent area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Fire doors in Ramsgate protect escape routes in family homes after loft conversions, schools and care homes alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Free-swing closers suit Ramsgate settings where residents or pupils find doors hard to open. Where doors in Ramsgate care homes, schools or offices are being wedged open, a hold-open device is the safe fix.
Why doors get wedged
Busy corridors, care homes and schools have doors that people need open all day. If there is no safe way to hold them, they get wedged, which defeats the door completely. A hold-open device or free-swing closer solves the problem properly.
What you get:
- Record of devices and test results
- Assessment of door use and alarm system
- Release testing with the alarm
- Coordination of alarm interface
The regulations behind fire doors in Ramsgate
In Ramsgate, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Ramsgate building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Buildings and duty holders in Ramsgate
Typical settings for fire door hold-open devices include schools, communal corridors and offices. In Ramsgate, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
What happens after you enquire
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
What does fire door hold-open devices cost in Ramsgate?
Budget around £180–£450 per door for the device, excluding fire alarm interface work, ex VAT for fire door hold-open devices. Our guide prices are the same in Ramsgate as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Covering Ramsgate and nearby
Nearby towns we cover include Broadstairs, Margate and Deal. Distance from Ramsgate does not change our guide prices, and the survey and quote are free.
Common questions
Is Ramsgate within your coverage area?
It is. We cover Ramsgate in Kent and neighbouring towns such as Broadstairs. There is no charge for the survey.
What happens on a survey in Ramsgate?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do hold-open devices need the fire alarm?
Hard-wired devices are released by the fire alarm system. Some battery units detect the alarm sound instead; they must be suitable for the building and its alarm.
Is it legal to wedge open a fire door?
Wedging a fire door open defeats its purpose and is likely to breach the duties under fire safety law. A hold-open device that releases on alarm is the safe alternative.