FD30 fire doors in Stirling

Getting FD30 fire doors right in Stirling

Our FD30 fire doors service covers Stirling and the wider Forth Valley area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.

Around Stirling, schools, care homes and small blocks of flats all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.

Each FD30 leaf we supply for Stirling is sized for the opening, rather than trimmed beyond what its certification allows. In Stirling, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes.

Where are FD30 doors used?

FD30 is the rating most buildings rely on. You will find it on flat entrance doors, doors onto escape corridors and stairs in houses in multiple occupation, kitchen doors in HMOs, and most internal doors on escape routes in offices, schools, surgeries and shops. Where smoke control matters too, the door is specified as FD30S (E30Sa), which adds a smoke seal and a tighter threshold.

The rating your building needs comes from its fire strategy or fire risk assessment, not from the door supplier. If you are unsure whether a door should be FD30 or FD60, we check the drawings, the risk assessment and what is installed now before we price anything. Our FD30 vs FD60 guide explains the difference.

What you get:

• Overhead closer set to close and latch
• Intumescent strips and smoke seals to the certification
• Certified FD30 or FD30S leaf, or full doorset
• Frame-to-wall gap sealed with an evidenced material

Rules and responsibilities in Stirling

Scottish rules apply to fire doors in Stirling. The Technical Handbooks under the Building (Scotland) Regulations 2004 set the standard for new and altered doors, and the local authority issues building warrants where they are needed. Workplaces and other non-domestic premises are covered by the Fire (Scotland) Act 2005.

Residential common parts in Stirling are treated differently from England, so we check the fire risk assessment and any landlord or factor requirements before specifying work.

Where FD30 fire doors fit in Stirling

From schools to HMOs, the requirement for FD30 fire doors in Stirling comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.

From enquiry to handover in Stirling

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

Budgeting for FD30 fire doors in Stirling

Guide pricing for FD30 fire doors: £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. Volume work across several doors in one Stirling building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Stirling and neighbouring towns

Beyond Stirling itself we also cover nearby towns such as Alloa (9.1 km), Falkirk and Cumbernauld. The service, pricing and evidence are the same wherever you are.

Questions from Stirling