FD30 fire doors in Falkirk

Getting FD30 fire doors right in Falkirk

We provide FD30 fire doors in Falkirk (FK1 and the surrounding postcodes), from the first survey through to a documented handover.

Falkirk has a broad mix of buildings, including houses with integral garages, light industrial buildings and schools, and the same fire door principles apply to all of them.

For a mixed portfolio in Falkirk, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side. Each FD30 leaf we supply for Falkirk is sized for the opening, rather than trimmed beyond what its certification allows.

Where are FD30 doors used?

FD30 is the rating most buildings rely on. You will find it on flat entrance doors, doors onto escape corridors and stairs in houses in multiple occupation, kitchen doors in HMOs, and most internal doors on escape routes in offices, schools, surgeries and shops. Where smoke control matters too, the door is specified as FD30S (E30Sa), which adds a smoke seal and a tighter threshold.

The rating your building needs comes from its fire strategy or fire risk assessment, not from the door supplier. If you are unsure whether a door should be FD30 or FD60, we check the drawings, the risk assessment and what is installed now before we price anything. Our FD30 vs FD60 guide explains the difference.

As standard, the work covers:

• Certified FD30 or FD30S leaf, or full doorset
• Photo record, product data and certificate references at handover
• Frame-to-wall gap sealed with an evidenced material
• Survey of the opening, frame and existing ironmongery

Fire door law for Falkirk properties

Scottish rules apply to fire doors in Falkirk. The Technical Handbooks under the Building (Scotland) Regulations 2004 set the standard for new and altered doors, and the local authority issues building warrants where they are needed. Workplaces and other non-domestic premises are covered by the Fire (Scotland) Act 2005.

Residential common parts in Falkirk are treated differently from England, so we check the fire risk assessment and any landlord or factor requirements before specifying work.

Who needs FD30 fire doors in Falkirk?

The need for FD30 fire doors usually arises in offices or schools, and sometimes blocks of flats. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Falkirk to keep escape routes protected throughout.

From enquiry to handover in Falkirk

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

What does FD30 fire doors cost in Falkirk?

Budget around £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. Our guide prices are the same in Falkirk as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.

Nearby areas we cover from Falkirk

Falkirk is about 16.0 km from Stirling, and we cover both, along with nearby Alloa and Cumbernauld. Send us your postcode and we'll confirm survey dates.

Common questions