Fire door hold-open devices in Stirling, done to the evidence
Our fire door hold-open devices service in Stirling is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Stirling has a broad mix of buildings, including small offices, small blocks of flats and schools, and the same fire door principles apply to all of them.
We coordinate with your fire alarm contractor in Stirling so every hold-open releases when it should. Free-swing closers suit Stirling settings where residents or pupils find doors hard to open.
Types of hold-open
Electromagnetic door holders are wall or floor magnets wired to the fire alarm. Hold-open closers combine the closer and the hold-open in one unit. Free-swing closers let the door move freely and close it on alarm. Some battery units listen for the alarm sound; these must be suitable for the alarm system and the building. The right choice depends on the door, the alarm and how people use the space.
As standard, the work covers:
- Electromagnetic holders to BS EN 1155
- Coordination of alarm interface
- Hold-open and free-swing closers
- Release testing with the alarm
What the rules say for Stirling
In Stirling, fire doors are specified against Scotland's Technical Handbooks (Section 2: Fire) under the Building (Scotland) Regulations 2004, rather than Approved Document B. Duties in non-domestic premises come from the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006.
England's regulation 10 does not apply in Scotland. We follow the building's fire risk assessment and, where building work needs a warrant, the local authority's requirements.
Buildings and duty holders in Stirling
Landlords, managing agents, facilities teams and homeowners in Stirling can all commission fire door hold-open devices from us. The usual settings are clinics and care homes, though single doors for communal corridors are just as welcome.
How a Stirling job runs
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
Budgeting for fire door hold-open devices in Stirling
If you need a budget figure first, the guide for fire door hold-open devices is £180–£450 per door for the device, excluding fire alarm interface work, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Around Stirling
Beyond Stirling itself we also cover nearby towns such as Alloa (9.1 km), Falkirk and Cumbernauld. The service, pricing and evidence are the same wherever you are.
Questions from Stirling
Is Stirling within your coverage area?
It is. We cover Stirling in Forth Valley and neighbouring towns such as Alloa. There is no charge for the survey.
What happens on a survey in Stirling?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
What is the difference between a hold-open and a free-swing closer?
A hold-open keeps the door at a fixed open position. A free-swing closer lets the door move freely, as if no closer were fitted, until the alarm sounds.
Who tests hold-open devices?
They should be tested with the fire alarm as part of the routine testing arrangements. We test them at installation and record the results.