Steel fire doors in Kidsgrove, done to the evidence
From the ST7 postcode district outwards, we take on steel fire doors across Kidsgrove for homes, blocks and workplaces.
Fire doors in Kidsgrove protect escape routes in care homes, small blocks of flats and light industrial buildings alike. We adapt the programme to the building and its occupants, never the standard of the installation.
For steel fire doors in Kidsgrove we order factory-prepared doorsets so the hardware matches the test evidence exactly. We anchor and seal steel frames in Kidsgrove buildings to the manufacturer's instructions and photograph the work before it is covered.
How installation differs from timber
Steel frames are fixed with the anchors and fixing centres the manufacturer specifies, and frames are often grouted or packed according to the instructions. Steel doors usually arrive with hinges and hardware preparations made in the factory, so the hardware set must be ordered correctly at the outset. BS 8214:2026 now covers steel, metal and composite doors as well as timber, including how to seal them to the surrounding structure.
As standard, the work covers:
- Ratings to suit the wall, including 60 minutes
- Frame anchoring and gap sealing to instructions
- Locks, closers and panic hardware as specified
- Powder-coated finishes
Fire door law for Kidsgrove properties
Fire doors in Kidsgrove fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Kidsgrove above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Which buildings in Kidsgrove need steel fire doors?
You are most likely to need steel fire doors if you look after workshops, bin stores or warehouses. Whatever the building in Kidsgrove, we survey each opening and tell you which doors need work and which do not.
How a Kidsgrove job runs
- Survey the opening, wall type and use
- Specify rating, size, hardware and finish
- Order factory-prepared steel doorset
- Remove existing door and prepare the opening
- Anchor, pack and seal the frame; hang the leaf
- Commission closer and locks; record evidence
What does steel fire doors cost in Kidsgrove?
As a guide, budget £900–£2,200 per steel doorset supplied and fitted, ex VAT for steel fire doors. The figure for your Kidsgrove building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Around Kidsgrove
Kidsgrove is about 9.8 km from Stoke-on-Trent, and we cover both, along with nearby Congleton and Newcastle-under-Lyme. Send us your postcode and we'll confirm survey dates.
Common questions
Is Kidsgrove within your coverage area?
It is. We cover Kidsgrove in Staffordshire and neighbouring towns such as Congleton. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Can steel fire doors be painted?
They are usually supplied powder coated. Repainting on site is possible but must avoid covering seals and labels, and should follow the manufacturer's guidance.
Do steel fire doors need intumescent seals?
Some steel doorsets use intumescent seals and some do not, depending on how they were tested. The certification sets out exactly what is required.