FD60 fire doors in Wakefield

FD60 fire doors in Wakefield, done to the evidence

We provide FD60 fire doors in Wakefield (WF1 and the surrounding postcodes), from the first survey through to a documented handover.

Around Wakefield, industrial units, offices and care homes all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.

For FD60 work in Wakefield we generally fit certified doorsets, so frame and leaf share the same test evidence. FD60 openings in Wakefield buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises.

When does a building need FD60 rather than FD30?

FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.

We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.

What you get:

• 60-minute glazing systems where vision panels are needed
• Frame fixing and structural gap sealing recorded with photos
• Check of the fire strategy rating for each opening
• Load-rated hinges and correctly powered closer

Fire door law for Wakefield properties

Fire doors in Wakefield fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.

For residential buildings in Wakefield above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.

Buildings and duty holders in Wakefield

Typical settings for FD60 fire doors include mixed-use commercial buildings, stair cores in taller blocks and plant and boiler rooms. In Wakefield, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

Our process in Wakefield

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

Prices for FD60 fire doors in Wakefield

Budget around £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. Our guide prices are the same in Wakefield as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.

Nearby areas we cover from Wakefield

Nearby towns we cover include Lofthouse, Ossett and Dewsbury. Distance from Wakefield does not change our guide prices, and the survey and quote are free.

Common questions