Riser and cupboard fire doors for Herne Bay buildings
Looking for riser and cupboard fire doors in Herne Bay? We supply and fit certified fire doors and components across Herne Bay and the wider Kent area, working from a free survey and a fixed written quote.
Around Herne Bay, family homes after loft conversions, houses with integral garages and small blocks of flats all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
Riser and meter cupboard doors in Herne Bay blocks are easy to overlook until an inspection flags them. While fitting riser doors in Herne Bay, we photograph any gaps in fire stopping we can see and pass them on to you.
The fire stopping behind the door
The door is only half the picture. Inside the riser, the services passing through each floor must be fire stopped. That is a separate specialist task. Where we find gaps or missing fire stopping while fitting riser doors, we record it and flag it to you so it can be addressed.
What you get:
- Locks and keep-locked arrangements as specified
- Signage as required
- Single and double flush configurations
- Fire-rated riser and cupboard doorsets
The regulations behind fire doors in Herne Bay
Fire doors in Herne Bay fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Herne Bay above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Where riser and cupboard fire doors fit in Herne Bay
Typical settings for riser and cupboard fire doors include hotels, office buildings and student accommodation. In Herne Bay, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
What happens after you enquire
- Survey risers, cupboards and wall ratings
- Confirm locked-shut or self-closing for each door
- Order doorsets sized to the openings
- Install and seal frames, hang leaves
- Fit locks, seals and signage
- Photograph and report on visible fire stopping
Guide prices in Herne Bay
As a guide, budget £450–£1,200 per riser or cupboard doorset supplied and fitted, ex VAT for riser and cupboard fire doors. The figure for your Herne Bay building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Covering Herne Bay and nearby
Herne Bay is about 44.1 km from Maidstone, and we cover both, along with nearby Whitstable and Canterbury. Send us your postcode and we'll confirm survey dates.
Common questions
Is Herne Bay within your coverage area?
It is. We cover Herne Bay in Kent and neighbouring towns such as Whitstable. There is no charge for the survey.
What happens on a survey in Herne Bay?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do you fix fire stopping inside risers?
Fire stopping is a separate specialist trade. We record anything we see while fitting doors and can coordinate with your fire stopping contractor.
Can I use a standard access panel for a riser?
Only if it is a fire-rated product with evidence for the wall rating. Many ordinary access panels and cupboard doors are not fire rated.