Riser and cupboard fire doors for Hythe buildings
From the SO45 postcode district outwards, we take on riser and cupboard fire doors across Hythe for homes, blocks and workplaces.
Hythe has a broad mix of buildings, including light industrial buildings, family homes after loft conversions and small blocks of flats, and the same fire door principles apply to all of them.
Riser and meter cupboard doors in Hythe blocks are easy to overlook until an inspection flags them. While fitting riser doors in Hythe, we photograph any gaps in fire stopping we can see and pass them on to you.
Closer or lock?
Doors on stores and risers that are kept locked shut usually do not need a self-closer, as long as the strategy allows it and the door is marked accordingly. Doors that are used regularly, such as cleaner's stores, usually do. We follow the fire strategy and the risk assessment for each opening.
Each installation includes:
- Signage as required
- Seals and frame gap sealing
- Fire-rated riser and cupboard doorsets
- Locks and keep-locked arrangements as specified
Fire door law for Hythe properties
In Hythe, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Hythe building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Buildings and duty holders in Hythe
Landlords, managing agents, facilities teams and homeowners in Hythe can all commission riser and cupboard fire doors from us. The usual settings are hotels and student accommodation, though single doors for office buildings are just as welcome.
The steps on a Hythe installation
- Survey risers, cupboards and wall ratings
- Confirm locked-shut or self-closing for each door
- Order doorsets sized to the openings
- Install and seal frames, hang leaves
- Fit locks, seals and signage
- Photograph and report on visible fire stopping
Prices for riser and cupboard fire doors in Hythe
As a guide, budget £450–£1,200 per riser or cupboard doorset supplied and fitted, ex VAT for riser and cupboard fire doors. The figure for your Hythe building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Hythe and neighbouring towns
We also cover towns near Hythe, including Southampton (4.9 km away), Totton and Eastleigh. If your building is in SO45 or a neighbouring district, the service and pricing are the same.
Questions from Hythe
Is Hythe within your coverage area?
It is. We cover Hythe in Hampshire and neighbouring towns such as Southampton. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Do riser doors need closers?
Not if they are kept locked shut and the fire strategy allows it; they should then be labelled accordingly. Cupboards that are opened regularly normally need self-closers.
What rating should a riser door be?
It should match the fire resistance the strategy requires for the riser enclosure, commonly 30 or 60 minutes. We confirm it before ordering.