Riser and cupboard fire doors for Basingstoke buildings
We provide riser and cupboard fire doors in Basingstoke (RG21 and the surrounding postcodes), from the first survey through to a documented handover.
Fire doors in Basingstoke protect escape routes in purpose-built flats, converted period houses and GP surgeries alike. We adapt the programme to the building and its occupants, never the standard of the installation.
While fitting riser doors in Basingstoke, we photograph any gaps in fire stopping we can see and pass them on to you. Riser and meter cupboard doors in Basingstoke blocks are easy to overlook until an inspection flags them.
Why riser doors get overlooked
Service riser doors are small, often hidden and rarely opened, so they are easy to forget until an inspection finds them. Common faults include cheap access panels that are not fire rated, missing seals, broken locks and doors that have been removed for access and never refitted. A riser runs through every floor, so a weak door can let fire or smoke bypass the building's compartments.
As standard, the work covers:
- Fire-rated riser and cupboard doorsets
- Locks and keep-locked arrangements as specified
- Single and double flush configurations
- Seals and frame gap sealing
What the rules say for Basingstoke
Fire doors in Basingstoke fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Basingstoke above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Buildings and duty holders in Basingstoke
Typical settings for riser and cupboard fire doors include blocks of flats, hotels and office buildings. In Basingstoke, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
What happens after you enquire
- Survey risers, cupboards and wall ratings
- Confirm locked-shut or self-closing for each door
- Order doorsets sized to the openings
- Install and seal frames, hang leaves
- Fit locks, seals and signage
- Photograph and report on visible fire stopping
Guide prices in Basingstoke
If you need a budget figure first, the guide for riser and cupboard fire doors is £450–£1,200 per riser or cupboard doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Covering Basingstoke and nearby
Nearby towns we cover include Fleet, Thatcham and Yateley. Distance from Basingstoke does not change our guide prices, and the survey and quote are free.
Common questions
Is Basingstoke within your coverage area?
It is. We cover Basingstoke in Hampshire and neighbouring towns such as Fleet. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
What rating should a riser door be?
It should match the fire resistance the strategy requires for the riser enclosure, commonly 30 or 60 minutes. We confirm it before ordering.
Do riser doors need closers?
Not if they are kept locked shut and the fire strategy allows it; they should then be labelled accordingly. Cupboards that are opened regularly normally need self-closers.