Getting riser and cupboard fire doors right in Radcliffe
We provide riser and cupboard fire doors in Radcliffe (M26 and the surrounding postcodes), from the first survey through to a documented handover.
Buildings in and around Radcliffe range from small offices to small blocks of flats and care homes. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
While fitting riser doors in Radcliffe, we photograph any gaps in fire stopping we can see and pass them on to you. Riser and meter cupboard doors in Radcliffe blocks are easy to overlook until an inspection flags them.
Closer or lock?
Doors on stores and risers that are kept locked shut usually do not need a self-closer, as long as the strategy allows it and the door is marked accordingly. Doors that are used regularly, such as cleaner's stores, usually do. We follow the fire strategy and the risk assessment for each opening.
Each installation includes:
- Seals and frame gap sealing
- Record of any fire stopping concerns found
- Locks and keep-locked arrangements as specified
- Single and double flush configurations
Fire door law for Radcliffe properties
England's framework applies in Radcliffe. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Radcliffe, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Who needs riser and cupboard fire doors in Radcliffe?
Typical settings for riser and cupboard fire doors include blocks of flats, hotels and office buildings. In Radcliffe, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
The steps on a Radcliffe installation
- Survey risers, cupboards and wall ratings
- Confirm locked-shut or self-closing for each door
- Order doorsets sized to the openings
- Install and seal frames, hang leaves
- Fit locks, seals and signage
- Photograph and report on visible fire stopping
Prices for riser and cupboard fire doors in Radcliffe
Guide pricing for riser and cupboard fire doors: £450–£1,200 per riser or cupboard doorset supplied and fitted, ex VAT. Volume work across several doors in one Radcliffe building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Around Radcliffe
Nearby towns we cover include Whitefield, Prestwich and Bury. Distance from Radcliffe does not change our guide prices, and the survey and quote are free.
Common questions
Do you work in Radcliffe?
Yes, we take on riser and cupboard fire doors in Radcliffe and the surrounding area, including Whitefield and Prestwich. Send your postcode and a few details and we'll come back with survey dates.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Do you fix fire stopping inside risers?
Fire stopping is a separate specialist trade. We record anything we see while fitting doors and can coordinate with your fire stopping contractor.
Do riser doors need closers?
Not if they are kept locked shut and the fire strategy allows it; they should then be labelled accordingly. Cupboards that are opened regularly normally need self-closers.