Getting riser and cupboard fire doors right in Failsworth
Our riser and cupboard fire doors service in Failsworth is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Failsworth has a broad mix of buildings, including small offices, schools and houses with integral garages, and the same fire door principles apply to all of them.
We match riser doors in Failsworth to the rating of the riser enclosure, not to whatever was there before. While fitting riser doors in Failsworth, we photograph any gaps in fire stopping we can see and pass them on to you.
Closer or lock?
Doors on stores and risers that are kept locked shut usually do not need a self-closer, as long as the strategy allows it and the door is marked accordingly. Doors that are used regularly, such as cleaner's stores, usually do. We follow the fire strategy and the risk assessment for each opening.
As standard, the work covers:
- Signage as required
- Seals and frame gap sealing
- Record of any fire stopping concerns found
- Locks and keep-locked arrangements as specified
What the rules say for Failsworth
The rules that apply to fire doors in Failsworth are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Failsworth block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Buildings and duty holders in Failsworth
You are most likely to need riser and cupboard fire doors if you look after blocks of flats, student accommodation or hotels. Whatever the building in Failsworth, we survey each opening and tell you which doors need work and which do not.
From enquiry to handover in Failsworth
- Survey risers, cupboards and wall ratings
- Confirm locked-shut or self-closing for each door
- Order doorsets sized to the openings
- Install and seal frames, hang leaves
- Fit locks, seals and signage
- Photograph and report on visible fire stopping
What does riser and cupboard fire doors cost in Failsworth?
As a guide, budget £450–£1,200 per riser or cupboard doorset supplied and fitted, ex VAT for riser and cupboard fire doors. The figure for your Failsworth building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Failsworth and neighbouring towns
Failsworth is about 5.4 km from Manchester, and we cover both, along with nearby Droylsden and Chadderton. Send us your postcode and we'll confirm survey dates.
Common questions
Is Failsworth within your coverage area?
It is. We cover Failsworth in Greater Manchester and neighbouring towns such as Droylsden. There is no charge for the survey.
Can you work from an existing inspection report for my Failsworth building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can I use a standard access panel for a riser?
Only if it is a fire-rated product with evidence for the wall rating. Many ordinary access panels and cupboard doors are not fire rated.
Do you fix fire stopping inside risers?
Fire stopping is a separate specialist trade. We record anything we see while fitting doors and can coordinate with your fire stopping contractor.