Riser and cupboard fire doors: our service in Swinton
Our riser and cupboard fire doors service covers Swinton and the wider Greater Manchester area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Buildings in and around Swinton range from care homes to family homes after loft conversions and small blocks of flats. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Riser and meter cupboard doors in Swinton blocks are easy to overlook until an inspection flags them. We match riser doors in Swinton to the rating of the riser enclosure, not to whatever was there before.
The fire stopping behind the door
The door is only half the picture. Inside the riser, the services passing through each floor must be fire stopped. That is a separate specialist task. Where we find gaps or missing fire stopping while fitting riser doors, we record it and flag it to you so it can be addressed.
What you get:
- Fire-rated riser and cupboard doorsets
- Single and double flush configurations
- Seals and frame gap sealing
- Signage as required
Which fire door rules apply in Swinton?
The rules that apply to fire doors in Swinton are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Swinton block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Buildings and duty holders in Swinton
You are most likely to need riser and cupboard fire doors if you look after office buildings, blocks of flats or hotels. Whatever the building in Swinton, we survey each opening and tell you which doors need work and which do not.
How a Swinton job runs
- Survey risers, cupboards and wall ratings
- Confirm locked-shut or self-closing for each door
- Order doorsets sized to the openings
- Install and seal frames, hang leaves
- Fit locks, seals and signage
- Photograph and report on visible fire stopping
Prices for riser and cupboard fire doors in Swinton
As a guide, budget £450–£1,200 per riser or cupboard doorset supplied and fitted, ex VAT for riser and cupboard fire doors. The figure for your Swinton building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Covering Swinton and nearby
Neighbouring towns such as Eccles, Walkden, Salford and Urmston are covered too, so clients with several buildings can use one installer and one evidence format.
Questions
Do you work in Swinton?
Yes, we take on riser and cupboard fire doors in Swinton and the surrounding area, including Eccles and Walkden. Send your postcode and a few details and we'll come back with survey dates.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Can I use a standard access panel for a riser?
Only if it is a fire-rated product with evidence for the wall rating. Many ordinary access panels and cupboard doors are not fire rated.
Do riser doors need closers?
Not if they are kept locked shut and the fire strategy allows it; they should then be labelled accordingly. Cupboards that are opened regularly normally need self-closers.