Getting intumescent strips and smoke seals right in Cleckheaton
Our intumescent strips and smoke seals service in Cleckheaton is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Around Cleckheaton, small blocks of flats, light industrial buildings and care homes all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
Painted and missing seals are among the most common fire door defects nationally; in Cleckheaton we replace them with the type and size the certification specifies. Seal replacement in Cleckheaton can be combined with any other remedials on the same inspection report.
Why seals fail
Seals are the most common defect on fire door inspections. They get painted over, pulled out, damaged by cleaning or simply worn by years of use. A painted brush seal no longer seals, and a strip of the wrong size may not close the gap in a fire. Our guide to seals explains the different types.
What you get:
- Check of gaps and closing after fitting
- Identification of the specified seals
- Removal of damaged or painted seals
- Intumescent pads to hinges and locks
Which fire door rules apply in Cleckheaton?
England's framework applies in Cleckheaton. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Cleckheaton, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Who needs intumescent strips and smoke seals in Cleckheaton?
From offices to HMOs, the requirement for intumescent strips and smoke seals in Cleckheaton comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
From enquiry to handover in Cleckheaton
- Identify door certification and seal specification
- Remove failed seals and clean the grooves
- Fit new strips and seals to the specified positions
- Fit missing pads and lock linings
- Check the door closes and latches against the new seals
- Record the products fitted
Guide prices in Cleckheaton
Guide pricing for intumescent strips and smoke seals: £45–£110 per door to supply and fit strips and seals, ex VAT. Volume work across several doors in one Cleckheaton building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Nearby areas we cover from Cleckheaton
We also cover towns near Cleckheaton, including Brighouse (5.2 km away), Batley and Dewsbury. If your building is in BD19 or a neighbouring district, the service and pricing are the same.
Questions from Cleckheaton
Do you work in Cleckheaton?
Yes, we take on intumescent strips and smoke seals in Cleckheaton and the surrounding area, including Brighouse and Batley. Send your postcode and a few details and we'll come back with survey dates.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Can I just add intumescent strips to an ordinary door?
No. Strips do not turn an ordinary door into a fire door. They only work as part of a door that was tested and certified with them.
Can smoke seals be painted?
No. Paint stops brush and blade seals working. If seals have been painted, they should be replaced.