Intumescent strips and smoke seals in Haywards Heath

Getting intumescent strips and smoke seals right in Haywards Heath

When you book intumescent strips and smoke seals in Haywards Heath, the aim is simple: doors that close, latch and seal as tested, with records that prove it.

Around Haywards Heath, small offices, care homes and houses with integral garages all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.

We check that each door in your Haywards Heath building closes and latches against its new seals before signing it off. Painted and missing seals are among the most common fire door defects nationally; in Haywards Heath we replace them with the type and size the certification specifies.

Why seals fail

Seals are the most common defect on fire door inspections. They get painted over, pulled out, damaged by cleaning or simply worn by years of use. A painted brush seal no longer seals, and a strip of the wrong size may not close the gap in a fire. Our guide to seals explains the different types.

As standard, the work covers:

• Check of gaps and closing after fitting
• Identification of the specified seals
• Intumescent strips in frame or leaf edge
• Brush or blade smoke seals

Fire door law for Haywards Heath properties

England's framework applies in Haywards Heath. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Haywards Heath, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Where intumescent strips and smoke seals fit in Haywards Heath

The need for intumescent strips and smoke seals usually arises in schools or offices, and sometimes care homes. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Haywards Heath to keep escape routes protected throughout.

What happens after you enquire

1. Identify door certification and seal specification
2. Remove failed seals and clean the grooves
3. Fit new strips and seals to the specified positions
4. Fit missing pads and lock linings
5. Check the door closes and latches against the new seals
6. Record the products fitted

Prices for intumescent strips and smoke seals in Haywards Heath

As a guide, budget £45–£110 per door to supply and fit strips and seals, ex VAT for intumescent strips and smoke seals. The figure for your Haywards Heath building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Around Haywards Heath

We also cover towns near Haywards Heath, including Burgess Hill (4.8 km away), Crawley and East Grinstead. If your building is in RH16 or a neighbouring district, the service and pricing are the same.

Common questions