Intumescent strips and smoke seals in Esher

Intumescent strips and smoke seals: our service in Esher

When you book intumescent strips and smoke seals in Esher, the aim is simple: doors that close, latch and seal as tested, with records that prove it.

In and around Esher, fire door work covers everything from care homes to family homes after loft conversions. We plan each job around the people who use the building.

Painted and missing seals are among the most common fire door defects nationally; in Esher we replace them with the type and size the certification specifies. Seal replacement in Esher can be combined with any other remedials on the same inspection report.

Pads, linings and hidden protection

Fire doors also rely on intumescent material you cannot see: pads behind hinges, linings around lock bodies and glazing seals. Where these are missing or damaged, we fit the correct items as part of the work.

On a typical job that means:

• Identification of the specified seals
• Removal of damaged or painted seals
• Intumescent strips in frame or leaf edge
• Intumescent pads to hinges and locks

What the rules say for Esher

Fire doors in Esher fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.

For residential buildings in Esher above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.

Who needs intumescent strips and smoke seals in Esher?

Typical settings for intumescent strips and smoke seals include blocks of flats, care homes and offices. In Esher, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

What happens after you enquire

1. Identify door certification and seal specification
2. Remove failed seals and clean the grooves
3. Fit new strips and seals to the specified positions
4. Fit missing pads and lock linings
5. Check the door closes and latches against the new seals
6. Record the products fitted

Budgeting for intumescent strips and smoke seals in Esher

Budget around £45–£110 per door to supply and fit strips and seals, ex VAT for intumescent strips and smoke seals. Our guide prices are the same in Esher as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.

Around Esher

Neighbouring towns such as Walton-on-Thames, Hampton, Sunbury-on-Thames and Surbiton are covered too, so clients with several buildings can use one installer and one evidence format.

Common questions