Intumescent strips and smoke seals in Banstead

Intumescent strips and smoke seals in Banstead, done to the evidence

We provide intumescent strips and smoke seals in Banstead (SM7 and the surrounding postcodes), from the first survey through to a documented handover.

Banstead has a broad mix of buildings, including care homes, small blocks of flats and small offices, and the same fire door principles apply to all of them.

Painted and missing seals are among the most common fire door defects nationally; in Banstead we replace them with the type and size the certification specifies. Seal replacement in Banstead can be combined with any other remedials on the same inspection report.

Getting the specification right

The door's certification states the type, size and position of strips and seals: in the frame or the leaf edge, single or double, and whether a combined intumescent and smoke seal is used. Replacements must match. Swapping in a generic strip from a hardware shop can undermine the door's performance.

Each installation includes:

• Check of gaps and closing after fitting
• Intumescent pads to hinges and locks
• Intumescent strips in frame or leaf edge
• Brush or blade smoke seals

Which fire door rules apply in Banstead?

England's framework applies in Banstead. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Banstead, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Where intumescent strips and smoke seals fit in Banstead

The need for intumescent strips and smoke seals usually arises in blocks of flats or offices, and sometimes care homes. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Banstead to keep escape routes protected throughout.

What happens after you enquire

1. Identify door certification and seal specification
2. Remove failed seals and clean the grooves
3. Fit new strips and seals to the specified positions
4. Fit missing pads and lock linings
5. Check the door closes and latches against the new seals
6. Record the products fitted

Prices for intumescent strips and smoke seals in Banstead

As a guide, budget £45–£110 per door to supply and fit strips and seals, ex VAT for intumescent strips and smoke seals. The figure for your Banstead building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Banstead and neighbouring towns

Neighbouring towns such as Sutton, Ewell, Epsom and Coulsdon are covered too, so clients with several buildings can use one installer and one evidence format.

Common questions