Intumescent strips and smoke seals for Burngreave buildings
If you need intumescent strips and smoke seals in Burngreave, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Buildings in and around Burngreave range from care homes to family homes after loft conversions and schools. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Painted and missing seals are among the most common fire door defects nationally; in Burngreave we replace them with the type and size the certification specifies. We check that each door in your Burngreave building closes and latches against its new seals before signing it off.
Why seals fail
Seals are the most common defect on fire door inspections. They get painted over, pulled out, damaged by cleaning or simply worn by years of use. A painted brush seal no longer seals, and a strip of the wrong size may not close the gap in a fire. Our guide to seals explains the different types.
What you get:
- Intumescent strips in frame or leaf edge
- Brush or blade smoke seals
- Removal of damaged or painted seals
- Intumescent pads to hinges and locks
What the rules say for Burngreave
In Burngreave, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Burngreave building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Buildings and duty holders in Burngreave
The need for intumescent strips and smoke seals usually arises in schools or care homes, and sometimes blocks of flats. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Burngreave to keep escape routes protected throughout.
What happens after you enquire
- Identify door certification and seal specification
- Remove failed seals and clean the grooves
- Fit new strips and seals to the specified positions
- Fit missing pads and lock linings
- Check the door closes and latches against the new seals
- Record the products fitted
Budgeting for intumescent strips and smoke seals in Burngreave
Guide pricing for intumescent strips and smoke seals: £45–£110 per door to supply and fit strips and seals, ex VAT. Volume work across several doors in one Burngreave building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Burngreave and neighbouring towns
Nearby towns we cover include Sheffield, Rotherham and Chapeltown. Distance from Burngreave does not change our guide prices, and the survey and quote are free.
Common questions
Is Burngreave within your coverage area?
It is. We cover Burngreave in South Yorkshire and neighbouring towns such as Sheffield. There is no charge for the survey.
What happens on a survey in Burngreave?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
How long do seals last?
It depends on use and care. Seals on busy doors wear faster. Regular inspections will show when they need replacing.
Can smoke seals be painted?
No. Paint stops brush and blade seals working. If seals have been painted, they should be replaced.